Contents
- Dimensions (Approximate) – High Lift
- Dimensions (Approximate) – Standard Lift
- Engine Details
- Operational Specs
- Transmission
- Buckets
- Axles
- Brakes
- Operating Specifications
- Service Refill Capacities
- Hydraulic Cycle Times
- Hydraulic System – Lift/Tilt
- Hydraulic System – Steering
- Air Conditioning System
- Operator’S Cab
- Sound Performance – Tier 4 Final/Stage Iv
Dimensions (Approximate) – High Lift
| Wheel Base | 14.9 ft in (4.55 m) |
| Note | Specs are calculated with 6.9 m3 (9.0 yd3) rock bucket and Michelin XLDD2 with 978 mm (3.2 ft) centerline of rear axle height. |
| B-Pin Height – Maximum Lift | 19.3 ft in (5.89 m) |
| Clearance At Maximum Lift | 12.7 ft in (3.88 m) |
| Front Axle Centerline To Bucket Tip | 15.9 ft in (4.85 m) |
| Ground To Bumper Clearance | 3.1 ft in (0.95 m) |
| Ground To Center Of Axles | 3.2 ft in (0.98 m) |
| Ground To Lower Hitch Clearance | 1.9 ft in (0.58 m) |
| Ground To Top Of Exhaust Stacks | 14.8 ft in (4.52 m) |
| Ground To Top Of Hood | 10.9 ft in (3.33 m) |
| Ground To Top Of ROPS | 13.7 ft in (4.18 m) |
| Maximum Overall Height – Bucket Raised | 25.8 ft in (7.87 m) |
| Maximum Overall Length | 41.3 ft in (12.59 m) |
| Reach – Maximum Lift | 7 ft in (2.14 m) |
| Rear Axle – Centerline To Bumper | 10.5 ft in (3.21 m) |
Dimensions (Approximate) – Standard Lift
| Note | Specs are calculated with 6.9 m3 (9.0 yd3) rock bucket and Michelin XLDD2 with 978 mm (3.2 ft) centerline of rear axle height. |
| Ground To Top Of Hood | 10.9 ft in (3.33 m) |
| B-Pin Height – Maximum Lift | 18 ft in (5.49 m) |
| Reach – Maximum Lift | 6.8 ft in (2.08 m) |
| Clearance At Maximum Lift | 11.3 ft in (3.45 m) |
| Wheel Base | 14.9 ft in (4.55 m) |
| Front Axle Centerline To Bucket Tip | 14.7 ft in (4.49 m) |
| Ground To Top Of ROPS | 13.7 ft in (4.18 m) |
| Ground To Bumper Clearance | 3.1 ft in (0.95 m) |
| Maximum Overall Height – Bucket Raised | 24.5 ft in (7.47 m) |
| Ground To Center Of Axles | 3.2 ft in (0.98 m) |
| Rear Axle – Centerline To Bumper | 10.5 ft in (3.21 m) |
| Ground To Lower Hitch Clearance | 1.9 ft in (0.58 m) |
| Maximum Overall Length | 40 ft in (12.2 m) |
| Ground To Top Of Exhaust Stacks | 14.8 ft in (4.52 m) |
Engine Details
| Net Power | 541 hp (403.5 kw) |
| Rated Speed | 1700 rpm |
| Displacement | 1105 cu in (18.2 L) |
| Torque Rise | 58 % |
| Bore | 5.7 in (144.8 mm) |
| Stroke | 7.2 in (182.9 mm) |
| Emissions | U.S. EPA Tier 4 Final/EU Stage IV |
| Net Power – Sae J1349 | 541 hp (403.5 kw) |
| Engine Model | Cat C18 ACERT |
| Gross Power – Iso 14396 | 580 hp (432.6 kw) |
| Peak Power Speed | 1,500 rpm |
| Peak Power Speed – 1,500 Rpm – Gross – Iso 14396 | 580 hp (432.6 kw) |
| Peak Power Speed – 1,500 Rpm – Gross – Sae J1995 | 588 hp (438.5 kw) |
| Peak Power Speed – 1,500 Rpm – Net Power – Sae J1349 | 541 hp (403.5 kw) |
| Peak Torque @ (Speed) – Sae J1995 | 2104 lb ft (2852.7 Nm) |
Operational Specs
| Operating Weight | 116362 lb (52781 kg) |
Transmission
| Transmission Type | Cat switched reluctance electric drive |
| Forward 1 (Virtual) | 4.3 mph (7 km/h) |
| Forward 2 (Virtual) | 7 mph (11.3 km/h) |
| Forward 3 (Virtual) | 13.8 mph (22.3 km/h) |
| Forward 4 (Virtual) | 20 mph (32.2 km/h) |
| Reverse 1 (Virtual) | 4.3 mph (7 km/h) |
| Reverse 2 (Virtual) | 7 mph (11.3 km/h) |
| Reverse 3 (Virtual) | 17.5 mph (28.2 km/h) |
Buckets
| Bucket Capacities | 4.7-13 m3 (6.2-17 yd3) |
Axles
| Front | Fixed |
| Rear | Trunnion |
| Oscillation Angle | 13 degrees |
Brakes
| Brakes | ISO 3450:2011 |
Operating Specifications
| Bucket Capacity Range | 4.7-13 m3 (6.2-17 yd3) |
| Rated Payload – Standard (Loose Material) | 35274 lb (16000 kg) |
| Rated Payload – High Lift (Loose Material) | 35274 lb (16000 kg) |
| Operating Weight – Standard | 116362 lb (52781 kg) |
| Operating Weight – High Lift | 119618 lb (54257.9 kg) |
| Rated Payload – Standard (Face Material) | 27557.8 lb (12500 kg) |
| Rated Payload – High Lift (Face Material) | 27557.8 lb (12500 kg) |
Service Refill Capacities
| Fuel Tank Capacity | 147 gal (556.5 L) |
| Diesel Exhaust Fluid Tank | 8.7 gal (33 L) |
| Engine Crankcase | 16 gal (60.6 L) |
| Transmission | 16 gal (60.6 L) |
| Differential – Final Drives – Front | 49 gal (185.5 L) |
| Differential – Final Drives – Rear | 49 gal (185.5 L) |
| Note | All non-road Tier 4 Final/Stage IV diesel engines are required to use: The machine has the flexibility to run on either ultra-low-sulfur diesel fuel (ULSD with 15 ppm of sulfur or less) or up to B20 biodiesel when feedstock meeting ASTM D7467 specifications is blended with ULSD. Cat DEO-ULS or oils that meet the Cat ECF-3, API CJ-4, and ACEA E9 specifications are required. Only use DEF that meets ISO 22241-1 standards. |
| Cooling System – Jacket Water | 30 gal (113.6 L) |
| Cooling Systems – Power Train | 8 gal (30.3 L) |
| Hydraulic System – Implement/Steering | 126 gal (477 L) |
Hydraulic Cycle Times
| Raise | 8 s |
| Dump | 2.2 s |
| Lower Float Down | 3.5 s |
| Rack Back | 4.5 s |
| Total Hydraulic Cycle Time | 18.2 s |
Hydraulic System – Lift/Tilt
| Lift/Tilt System – Circuit | EH-Positive Flow Control, Flow Sharing |
| Lift/Tilt System – Pump | Variable displacement piston |
| Relief Valve Setting – Lift/Tilt | 4757 psi |
| Tilt Cylinder – Stroke | 27 in (685.8 mm) |
| Lift Cylinder – Bore | 8.7 in (221 mm) |
| Lift Cylinder – Stroke | 41.3 in (1049.1 mm) |
| Tilt Cylinder – Bore | 8.7 in (221 mm) |
| Maximum Flow At 1,400-1,600 Rpm | 153 gal/min |
Hydraulic System – Steering
| Steering System – Circuit | Pilot, load sensing |
| Steering System – Pump | Piston, variable displacement |
| Steering Cut Off Pressure | 4351 psi |
| Steering Cycle Times – Low Idle | 5.6 s |
| Steering Cycle Times – High Idle | 3.4 s |
| Maximum Flow At 1,400-1,600 Rpm | 71.3 gal/min |
| Steering | ISO 5010:2007 |
Air Conditioning System
| Air Conditioning | The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.8 kg of refrigerant which has a CO2 equivalent of 2.574 metric tonnes. |
Operator’S Cab
| ROPS/FOPS | ROPS/FOPS meet ISO 3471:2008 and ISO 3449:2005 Level II standards |
Sound Performance – Tier 4 Final/Stage Iv
| Operator Sound Level (Iso 6396) | 72 dB(A) |
| Machine Sound Level (Iso 6395) | 109 dB(A) |
| Note (1) | The operator sound pressure level was measured according to the test procedures and conditions specified in ISO 6396:2008. The measurement was conducted at 70 percent of the maximum engine cooling fan speed. |
| Note (2) | Hearing protection may be needed when the machine is operated with a cab that is not properly maintained or when the doors or windows are open for extended periods or in a noisy environment. |
| Note (3) | The machine sound power level was measured according to the test procedures and conditions specified in ISO 6395:2008. The measurement was conducted at 70 percent of the maximum engine cooling fan speed. |
