Clark 125C Wheel Loader

Bucket

Dump Clearance At Max Raise 9.62 ft in (2930 mm)
Bucket Capacity – Heaped 4.45 yd3 (3.4 m3)
Bucket Capacity – Struck 3.8 yd3 (2.9 m3)
Bucket Width 10 ft in (3048 mm)
Breakout Force 39265.13 lb (174.66 kN)

Dimensions

Ground Clearance 1.19 ft in (360 mm)
Length With Bucket On Ground 27.37 ft in (8340 mm)
Width Over Tires 9.32 ft in (2840 mm)
Height To Top Of Cab 11.29 ft in (3440 mm)
Wheelbase 10.67 ft in (3251 mm)
Hinge Pin – Max Height 13.34 ft in (4065 mm)
Reach At Max Lift And Dump 3.55 ft in (1080 mm)

Engine Details

Number Of Cylinders 6
Engine Make Cummins
Engine Model LT-10-225 HT
Net Power 214.6 hp (160 kw)
Gross Power 226.7 hp (169 kw)
Power Measured @ 2000 rpm
Max Torque 750.2 lb ft (1017 Nm)
Displacement 611 cu in (10.1 L)
Torque Measured @ 1300 rpm

Operational Specs

Operating Weight 43475.2 lb (19720 kg)
Fuel Tank Capacity 75.1 gal (284 L)
Hydraulic System Fluid Capacity 76.1 gal (288 L)
Engine Oil Fluid Capacity 9 gal (34 L)
Cooling System Fluid Capacity 15.1 gal (57 L)
Transmission Fluid Capacity 10.6 gal (40 L)
Front Axle/Diff Fluid Capacity 9.1 gal (34.1 L)
Rear Axle/Diff Fluid Capacity 9.1 gal (34.1 L)
Static Tipping Weight 32319.8 lb (14660 kg)
Turning Radius 24.6 ft in (7475 mm)
Operating Voltage 24 V
Alternator Supplied Amperage 100 amps
Rear Axle Oscillation 18.5 degrees
Tire Size 23.5-25

Transmission

Transmission Type Clark countershaft powershift
Number Of Forward Gears 4
Number Of Reverse Gears 4
Max Speed – Forward 19.3 mph (30.9 km/h)
Max Speed – Reverse 19.3 mph (30.9 km/h)

Hydraulic System

Relief Valve Setting 2755.8 psi (19000 kPa)
Pump Flow Capacity 90.5 gal/min (342.5 L/min)
Raise Time 7.4 sec
Dump Time 1.4 sec
Lower Time 3.2 sec
Pump Type tandem gear type
Ask a question