Doosan DL250TC Integrated Tool Carrier

Dimensions

Length W/ Bucket On Ground 26.24 ft in (7995 mm)
Width Over Tires 8.56 ft in (2608 mm)
Height To Top Of Cab 10.7 ft in (3260 mm)
Wheelbase 9.91 ft in (3020 m)
Ground Clearance 1.35 ft in (410 mm)
Dump Clearance At Max Lift 8.86 ft in (2700 mm)
Max Lift Height 12.22 ft in (3722 mm)
Reach At Max Height And Dump 4.37 ft in (1330 mm)
Length With Out Forks On Ground 27.67 ft in (8431 mm)

Engine Details

Engine Make Doosan
Engine Model DL06
Gross Power 162 hp (120.9 kw)
Net Power 153 hp (114.1 kw)
Max Torque 593 lb ft (804 Nm)
Displacement 360 cu in (5.9 L)
Aspiration turbo compressor and air-air cooling

Operational Specs

Operating Weight 31085 lb (14100 kg)
Fuel Tank Capacity 67.4 gal (255 L)
Cooling System Fluid Capacity 11.9 gal (45 L)
Engine Oil Capacity 7.2 gal (27 L)
Transmission Fluid Capacity 11.9 gal (45 L)
Front Diff Fluid Capacity 8.2 gal (31 L)
Rear Diff Fluid Capacity 6.4 gal (24 L)
Hydraulic System Fluid Capacity 41.8 gal (158 L)
Turning Radius 18 ft in (5477 mm)
Operating Voltage 24 V
Rear Axle Oscillation 11 degrees
Static Tipping Load – Bucket 21623 lb (9808.1 kg)
Static Tipping Load – Forks 19996 lb (9070.1 kg)
Tire Size 20.5R25

Transmission

Transmission Type powershift
Number Of Forward Gears 4
Number Of Reverse Gears 3
Max Speed Forward 21.2 mph (34 km/h)
Max Speed Reverse 14.7 mph (23.5 km/h)

Hydraulic System

Pump Type triple section vane pump
Relief Valve Setting 2842.8 psi (19600 kPa)
Raise Time 5.4 sec
Dump Time 1.3 sec
Lower Time 3.3 sec

Bucket

Breakout Force 28660 lb (127.5 kN)
Bucket Capacity – Struck 3.3 yd3 (2.5 m3)
Ask a question