JCB 419S HT Wheel Loader

Bucket

Dump Clearance At Max Raise 9.03 ft in (2750 mm)
Bucket Capacity – Heaped 2.1 yd3 (1.6 m3)
Bucket Capacity – Struck 1.78 yd3 (1.36 m3)
Bucket Width 7.88 ft in (2400 mm)
Breakout Force 20682.43 lb (92 kN)

Dimensions

Ground Clearance 1.65 ft in (502 mm)
Length With Bucket On Ground 21.75 ft in (6627 mm)
Width Over Tires 8.78 ft in (2674 mm)
Height To Top Of Cab 10.47 ft in (3191 mm)
Wheelbase 9.36 ft in (2850 mm)
Hinge Pin – Max Height 12.14 ft in (3700 mm)
Reach At Max Lift And Dump 2.76 ft in (840 mm)

Engine Details

Emission Standards EU Stage IV, US EPA Tier 4F
Number Of Cylinders 6
No. Of Valves 4
Engine Model QSB
Engine Type Cummins
Net Power 183 hp (136.5 kw)
Air Cleaner Cyclonic pre-filter with engine fan scavenge system
Gross Power 173 hp (129.1 kw)
Power Measured @ 2100 rpm
Max Torque 841 Nm
Displacement 408.9 cu in (6.7 L)
Torque Measured @ 1500 rpm
Aspiration Turbo Charged
Fan Drive Type Hydraulically driven cooling fan

Operational Specs

DEF Tank Capacity 6.3 gal (23.8 L)
Auxiliary Fuel Tank 66.1 gal (250 L)
Full Turn Tipping Load 15366.3 lb (6970 kg)
Payload 7683.2 lb (3485 kg)
Operating Weight 23397.7 lb (10613 kg)
Fuel Tank Capacity 66.1 gal (250 L)
Hydraulic System Fluid Capacity 41 gal (155 L)
Turning Radius 18.9 ft in (5740 mm)
Operating Voltage 24 V
Alternator Supplied Amperage 120 amps
Rear Axle Oscillation 9 degrees
Articulation Angle 38 degrees

Transmission

Transmission Type 6 speed non-lock up converter ZF
Number Of Forward Gears 6
Number Of Reverse Gears 3
Max Speed – Forward 24.9 mph (40 km/h)
Max Speed – Reverse 20 mph (32.1 km/h)

Hydraulic System

Max Operating Pressure 230 bar
Relief Valve Setting 3190 psi (21994.3 kPa)
Pump Flow Capacity 47.6 gal/min (180 L/min)
Raise Time 3.9 sec (3.86 sec)
Dump Time 1.6 sec (1.53 sec)
Lower Time 2.4 sec
Total Cycle 7.8 sec (7.79 sec)
Pump Type Variable placement
Ask a question