JCB 426BHT Wheel Loader

Bucket

Dump Clearance At Max Raise 9.44 ft in (2876 mm)
Bucket Capacity – Heaped 2.36 yd3 (1.8 m3)
Bucket Width 8.2 ft in (2498 mm)
Breakout Force 27426.69 lb (122 kN)

Dimensions

Ground Clearance 1.24 ft in (375 mm)
Length With Bucket On Ground 21.46 ft in (6540 mm)
Width Over Tires 7.89 ft in (2403 mm)
Height To Top Of Cab 10.36 ft in (3155 mm)
Wheelbase 9.52 ft in (2900 mm)
Hinge Pin – Max Height 12.6 ft in (3839 mm)
Reach At Max Lift And Dump 3.24 ft in (986 mm)

Engine Details

Number Of Cylinders 6
Engine Make Perkins
Engine Model 1006-60T
Net Power 132 hp (98.5 kw)
Gross Power 144 hp (107.4 kw)
Power Measured @ 2200 rpm
Max Torque 433.7 lb ft (588 Nm)
Displacement 365.3 cu in (6 L)
Torque Measured @ 1400 rpm
Aspiration Turbocharged

Operational Specs

Fuel Tank Capacity 56.1 gal (212 L)
Hydraulic System Fluid Capacity 55.5 gal (210 L)
Engine Oil Fluid Capacity 3.9 gal (14.7 L)
Cooling System Fluid Capacity 13.3 gal (50 L)
Transmission Fluid Capacity 6.1 gal (23 L)
Front Axle/Diff Fluid Capacity 6.9 gal (26 L)
Rear Axle/Diff Fluid Capacity 6.9 gal (26 L)
Operating Voltage 24 V
Alternator Supplied Amperage 55 amps
Rear Axle Oscillation 25 degrees
Tire Size 17.5x25x12 ply (L2)

Transmission

Transmission Type 4 wheel drive, semi-autoshift full powershift
Number Of Forward Gears 4
Number Of Reverse Gears 3
Max Speed – Forward 23.6 mph (37.9 km/h)
Max Speed – Reverse 16.8 mph (26.9 km/h)

Hydraulic System

Relief Valve Setting 3212 psi (22146 kPa)
Pump Flow Capacity 58.2 gal/min (220 L/min)
Raise Time 4.8 sec
Dump Time 1.5 sec
Lower Time 3.4 sec
Pump Type variable displacement piston pumps with load sensing system
Ask a question