JCB 426HT High Lift Integrated Tool Carrier

Dimensions

Length W/ Bucket On Ground 23.77 ft in (7244 mm)
Width Over Tires 8.53 ft in (2597 mm)
Height To Top Of Cab 10.95 ft in (3335 mm)
Wheelbase 9.85 ft in (3000 m)
Ground Clearance 1.46 ft in (442 mm)
Hinge Pin Max Height 14.23 ft in (4336 mm)
Dump Clearance At Max Lift 10.7 ft in (3261 mm)
Max Lift Height 13.61 ft in (4148 mm)
Fork Tine Length 4.01 ft in (1220 mm)
Reach At Max Height And Dump 4.08 ft in (1243 mm)

Engine Details

Number Of Cylinders 6
Engine Model QB6.7
Gross Power 165 hp (123.1 kw)
Net Power 152 hp (113.4 kw)
Power Measured @ 2200 rpm
Max Torque 540 lb ft (732.2 Nm)
Torque Measured @ 1400 rpm
Displacement 408.9 cu in (6.7 L)
Aspiration Turbocharged wastegated

Operational Specs

Operating Weight 29436 lb (13352 kg)
Fuel Tank Capacity 61 gal (231 L)
Cooling System Fluid Capacity 9 gal (34.1 L)
Engine Oil Capacity 3.7 gal (14.1 L)
Transmission Fluid Capacity 7 gal (26.5 L)
Front Diff Fluid Capacity 10.3 gal (39 L)
Rear Diff Fluid Capacity 9.8 gal (37.1 L)
Hydraulic System Fluid Capacity 55 gal (208.2 L)
Turning Radius 20.7 ft in (6282 mm)
Operating Voltage 24 V
Alternator Supplied Amperage 70 amps
Rear Axle Oscillation 21 degrees
Static Tipping Load – Bucket 19407 lb (8802.9 kg)
Static Tipping Load – Forks 14521 lb (6586.7 kg)
Tire Size 20.5R25 XHA(L3)

Transmission

Transmission Type Smooth shift power shift
Number Of Forward Gears 4
Number Of Reverse Gears 3
Max Speed Forward 23.5 mph (37.9 km/h)
Max Speed Reverse 15.6 mph (25.2 km/h)

Hydraulic System

Pump Type Twin variable displacement piston pumps
Relief Valve Setting 3625 psi (24993.5 kPa)
Pump Flow Capacity 69.8 gal/min (264 L/min)
Raise Time 4.4 sec
Dump Time 1 sec
Lower Time 2.7 sec

Bucket

Breakout Force 31023.7 lb (138 kN)
Bucket Capacity – Heaped 2.5 yd3 (2 m3)
Bucket Capacity – Struck 2.2 yd3 (1.7 m3)
Ask a question