JCB 426ZX Wheel Loader

Bucket

Dump Clearance At Max Raise 9.36 ft in (2850 mm)
Bucket Capacity – Heaped 2.36 yd3 (1.8 m3)
Bucket Capacity – Struck 2.04 yd3 (1.56 m3)
Bucket Width 8.37 ft in (2550 mm)
Breakout Force 32597.3 lb (145 kN)

Dimensions

Ground Clearance 1.46 ft in (442 mm)
Length With Bucket On Ground 22.15 ft in (6750 mm)
Width Over Tires 8.15 ft in (2482 mm)
Height To Top Of Cab 10.88 ft in (3315 mm)
Wheelbase 9.85 ft in (3000 mm)
Hinge Pin – Max Height 11.96 ft in (3645 mm)
Reach At Max Lift And Dump 3.55 ft in (1081 mm)

Engine Details

Number Of Cylinders 6
Engine Make Cummins
Engine Model BTAA5.9C
Net Power 150 hp (111.9 kw)
Gross Power 152 hp (113.4 kw)
Power Measured @ 2200 rpm
Max Torque 455.1 lb ft (617 Nm)
Displacement 360.1 cu in (5.9 L)
Torque Measured @ 1600 rpm
Aspiration Turbocharged

Operational Specs

Operating Weight 28329.4 lb (12850 kg)
Fuel Tank Capacity 60.8 gal (230 L)
Hydraulic System Fluid Capacity 55.5 gal (210 L)
Engine Oil Fluid Capacity 3.7 gal (14 L)
Cooling System Fluid Capacity 9.3 gal (35 L)
Transmission Fluid Capacity 8 gal (30 L)
Front Axle/Diff Fluid Capacity 10.4 gal (39 L)
Rear Axle/Diff Fluid Capacity 9.8 gal (37 L)
Static Tipping Weight 19996 lb (9070 kg)
Turning Radius 19 ft in (5790 mm)
Operating Voltage 24 V
Alternator Supplied Amperage 70 amps
Rear Axle Oscillation 25 degrees
Tire Size 20.5R25 XHA (L3)

Transmission

Transmission Type smooth powershift
Number Of Forward Gears 4
Number Of Reverse Gears 3
Max Speed – Forward 24 mph (38.5 km/h)
Max Speed – Reverse 15.1 mph (24.3 km/h)

Hydraulic System

Relief Valve Setting 3625 psi (24993.5 kPa)
Pump Flow Capacity 34.9 gal/min (132 L/min)
Raise Time 4.4 sec
Dump Time 1 sec
Lower Time 2.7 sec
Pump Type twin variable displacement piston pumps w/ load sensing system
Ask a question