JCB 427 HT HL Wheel Loader

Bucket

Dump Clearance At Max Raise 10.66 ft in (3247 mm)
Bucket Capacity – Heaped 2.36 yd3 (1.8 m3)
Bucket Capacity – Struck 2.04 yd3 (1.56 m3)
Bucket Width 8.37 ft in (2550 mm)
Breakout Force 31023.64 lb (138 kN)

Dimensions

Ground Clearance 1.55 ft in (472 mm)
Length With Bucket On Ground 24.72 ft in (7532 mm)
Width Over Tires 8.15 ft in (2483 mm)
Height To Top Of Cab 11.03 ft in (3360 mm)
Wheelbase 10.01 ft in (3050 mm)
Hinge Pin – Max Height 14.13 ft in (4306 mm)
Reach At Max Lift And Dump 3.89 ft in (1184 mm)

Engine Details

Emission Standards EU Stage IV, US EPA Tier 4F
Number Of Cylinders 6
No. Of Valves 4
Engine Model QSB
Engine Type Cummins
Net Power 146 hp (108.9 kw)
Air Cleaner Cyclonic pre filter with engine fan scavenge system
Gross Power 179 hp (133.5 kw)
Power Measured @ 2100 rpm
Max Torque 841 Nm
Displacement 408.9 cu in (6.7 L)
Torque Measured @ 1500 rpm
Aspiration Turbo Charged
Fan Drive Type Hydraulically driven cooling fan

Operational Specs

DEF Tank Capacity 10.6 gal (40 L)
Full Turn Tipping Load 17610.6 lb (7988 kg)
Payload 8805.3 lb (3994 kg)
Operating Weight 29938.8 lb (13580 kg)
Fuel Tank Capacity 76.7 gal (290 L)
Hydraulic System Fluid Capacity 55.5 gal (210 L)
Turning Radius 19.8 ft in (6035 mm)
Operating Voltage 24 V
Alternator Supplied Amperage 120 amps
Rear Axle Oscillation 10.5 degrees
Articulation Angle 40 degrees

Transmission

Transmission Type 4 speed non-lock up converter 4WG
Number Of Forward Gears 4
Number Of Reverse Gears 3
Max Speed – Forward 24 mph (38.5 km/h)
Max Speed – Reverse 15.4 mph (24.7 km/h)

Hydraulic System

Max Operating Pressure 250 bar
Relief Valve Setting 3190 psi (21994.3 kPa)
Pump Flow Capacity 33.3 gal/min (126 L/min)
Raise Time 5.1 sec (5.08 sec)
Dump Time 1.5 sec (1.41 sec)
Lower Time 3.3 sec
Total Cycle 9.8 sec (9.79 sec)
Pump Type Variable displacement
Ask a question