JCB 437 HT Wheel Loader

Bucket

Dump Clearance At Max Raise 9.17 ft in (2794 mm)
Bucket Capacity – Heaped 3.01 yd3 (2.3 m3)
Bucket Capacity – Struck 2.6 yd3 (1.99 m3)
Bucket Width 8.99 ft in (2740 mm)
Breakout Force 33046.92 lb (147 kN)

Dimensions

Ground Clearance 1.55 ft in (472 mm)
Length With Bucket On Ground 23.96 ft in (7301 mm)
Width Over Tires 8.53 ft in (2598 mm)
Height To Top Of Cab 11.03 ft in (3360 mm)
Wheelbase 10.01 ft in (3050 mm)
Hinge Pin – Max Height 13.2 ft in (4021 mm)
Reach At Max Lift And Dump 3.66 ft in (1115 mm)

Engine Details

Emission Standards EU Stage IV, US EPA Tier 4F
Number Of Cylinders 6
No. Of Valves 4
Engine Model QSB
Engine Type Cummins
Net Power 161 hp (120.1 kw)
Air Cleaner Cyclonic pre filter with engine fan scavenge system
Gross Power 183 hp (136.5 kw)
Power Measured @ 2100 rpm
Max Torque 841 Nm
Displacement 408.9 cu in (6.7 L)
Torque Measured @ 1500 rpm
Aspiration Turbo Charged
Fan Drive Type Hydraulically driven cooling fan

Operational Specs

DEF Tank Capacity 10.6 gal (40 L)
Full Turn Tipping Load 20436.9 lb (9270 kg)
Payload 10218.5 lb (4635 kg)
Operating Weight 32621.8 lb (14797 kg)
Fuel Tank Capacity 71.4 gal (270 L)
Hydraulic System Fluid Capacity 55.5 gal (210 L)
Turning Radius 19.8 ft in (6021 mm)
Operating Voltage 24 V
Alternator Supplied Amperage 120 amps
Rear Axle Oscillation 10.5 degrees
Articulation Angle 40 degrees

Transmission

Transmission Type 4 speed non-lock up converter 4WG
Number Of Forward Gears 4
Number Of Reverse Gears 3
Max Speed – Forward 23.6 mph (37.9 km/h)
Max Speed – Reverse 16 mph (25.7 km/h)

Hydraulic System

Max Operating Pressure 250 bar
Relief Valve Setting 3190 psi (21994.3 kPa)
Pump Flow Capacity 33.3 gal/min (126 L/min)
Raise Time 6.3 sec (6.24 sec)
Dump Time 2 sec (1.96 sec)
Lower Time 4.7 sec (4.63 sec)
Total Cycle 12.9 sec (12.83 sec)
Pump Type Variable displacement
Ask a question