John Deere 744H High Lift Wheel Loader

Bucket

Dump Clearance At Max Raise 11.85 ft in (3611 mm)
Bucket Capacity – Heaped 5.25 yd3 (4 m3)
Bucket Capacity – Struck 5 yd3 (3.8 m3)
Bucket Width 9.98 ft in (3040 mm)
Breakout Force 37821 lb (168.24 kN)

Dimensions

Ground Clearance 1.53 ft in (465 mm)
Length With Bucket On Ground 30.27 ft in (9226 mm)
Width Over Tires 9.65 ft in (2940 mm)
Height To Top Of Cab 11.55 ft in (3520 mm)
Wheelbase 11.16 ft in (3400 mm)
Hinge Pin – Max Height 15.91 ft in (4849 mm)
Reach At Max Lift And Dump 4.67 ft in (1421 mm)

Engine Details

Number Of Cylinders 6
Engine Make John Deere
Engine Model 6125A
Net Power 260 hp (194 kw)
Gross Power 283 hp (211 kw)
Power Measured @ 2000 rpm
Max Torque 943 lb ft (1280 Nm)
Displacement 766 cu in (12.5 L)
Torque Measured @ 1500 rpm
Aspiration Turbocharged and Aftercooled
Torque Rise 45 %

Operational Specs

Operating Weight 51275 lb (23258 kg)
Fuel Tank Capacity 114 gal (432 L)
Hydraulic System Fluid Capacity 38 gal (144 L)
Engine Oil Fluid Capacity 10.1 gal (38 L)
Cooling System Fluid Capacity 11.4 gal (43 L)
Transmission Fluid Capacity 7.4 gal (28 L)
Front Axle/Diff Fluid Capacity 12.2 gal (46 L)
Rear Axle/Diff Fluid Capacity 12.2 gal (46 L)
Static Tipping Weight 29829 lb (13530 kg)
Turning Radius 20.2 ft in (6140 mm)
Operating Voltage 24 V
Alternator Supplied Amperage 55 amps
Rear Axle Oscillation 26 degrees
Tire Size 26.5-25

Transmission

Transmission Type Power Shift
Number Of Forward Gears 4
Number Of Reverse Gears 3
Max Speed – Forward 24.5 mph (39.5 km/h)
Max Speed – Reverse 19.3 mph (31 km/h)

Hydraulic System

Relief Valve Setting 3200 psi (22000 kPa)
Pump Flow Capacity 104 gal/min (393 L/min)
Raise Time 6.6 sec
Dump Time 1.5 sec
Lower Time 3 sec
Pump Type Piston Pump
Ask a question