John Deere 744H MH Wheel Loader

Bucket

Dump Clearance At Max Raise 10.51 ft in (3202 mm)
Bucket Capacity – Heaped 5.75 yd3 (4.41 m3)
Bucket Capacity – Struck 5 yd3 (3.8 m3)
Bucket Width 10.75 ft in (3275 mm)
Breakout Force 37175 lb (16860 kN)

Dimensions

Ground Clearance 1.53 ft in (465 mm)
Length With Bucket On Ground 29.29 ft in (8925 mm)
Width Over Tires 9.65 ft in (2940 mm)
Height To Top Of Cab 11.55 ft in (3520 mm)
Wheelbase 11.16 ft in (3400 mm)
Hinge Pin – Max Height 14.8 ft in (4510 mm)
Reach At Max Lift And Dump 6.24 ft in (1900 mm)

Engine Details

Number Of Cylinders 6
Engine Make John Deere
Engine Model 6125A
Net Power 260 hp (193.9 kw)
Gross Power 283 hp (211.1 kw)
Power Measured @ 2000 rpm
Max Torque 980 lb ft (1330 Nm)
Displacement 766 cu in (12.5 L)
Torque Measured @ 1500 rpm
Aspiration Turbocharged with Aftercooler
Torque Rise 40 %

Operational Specs

Operating Weight 51590 lb (23400.9 kg)
Fuel Tank Capacity 114 gal (432 L)
Hydraulic System Fluid Capacity 38 gal (144 L)
Engine Oil Fluid Capacity 10.1 gal (38 L)
Cooling System Fluid Capacity 11.4 gal (43 L)
Transmission Fluid Capacity 7.4 gal (28 L)
Front Axle/Diff Fluid Capacity 12.2 gal (46 L)
Rear Axle/Diff Fluid Capacity 12.2 gal (46 L)
Static Tipping Weight 36310 lb (16470 kg)
Turning Radius 20.2 ft in (6140 mm)
Operating Voltage 24 V
Alternator Supplied Amperage 55 amps
Rear Axle Oscillation 26 degrees
Tire Size 26.5-25

Transmission

Transmission Type Power Shift
Number Of Forward Gears 4
Number Of Reverse Gears 3
Max Speed – Forward 24.5 mph (39.5 km/h)
Max Speed – Reverse 19.3 mph (31 km/h)

Hydraulic System

Relief Valve Setting 3200 psi (22000 kPa)
Pump Flow Capacity 112 gal/min (423 L/min)
Raise Time 6.1 sec
Dump Time 1.5 sec
Lower Time 2.8 sec
Pump Type Piston Pump
Ask a question