John Deere 744J Waste Handler Wheel Loader

Bucket

Dump Clearance At Max Raise 9.08 ft in (2780 mm)
Bucket Capacity – Heaped 6 yd3 (4.7 m3)
Bucket Capacity – Struck 5.3 yd3 (4 m3)
Bucket Width 10.67 ft in (3251 mm)
Breakout Force 32691 lb (145.4 kN)

Dimensions

Ground Clearance 1.65 ft in (510 mm)
Length With Bucket On Ground 27.83 ft in (8495 mm)
Width Over Tires 10.5 ft in (3200 mm)
Height To Top Of Cab 11.67 ft in (3560 mm)
Wheelbase 11.17 ft in (3400 mm)
Hinge Pin – Max Height 14.17 ft in (4320 mm)
Reach At Max Lift And Dump 3.93 ft in (1199 mm)

Engine Details

Number Of Cylinders 6
Engine Make John Deere
Engine Model 6125H
Net Power 266 hp (198 kw)
Power Measured @ 2000 rpm
Max Torque 970 lb ft (1315 Nm)
Displacement 766 cu in (12.6 L)
Torque Measured @ 1100 rpm
Aspiration Turbocharged charge air cooled
Torque Rise 40 %

Operational Specs

Operating Weight 66086 lb (29977 kg)
Fuel Tank Capacity 122 gal (462 L)
Hydraulic System Fluid Capacity 38 gal (144 L)
Engine Oil Fluid Capacity 10.1 gal (38 L)
Cooling System Fluid Capacity 10.1 gal (38 L)
Transmission Fluid Capacity 7.4 gal (28 L)
Front Axle/Diff Fluid Capacity 13 gal (49 L)
Rear Axle/Diff Fluid Capacity 13 gal (49 L)
Static Tipping Weight 47099 lb (21364 kg)
Turning Radius 20.2 ft in (6140 mm)
Operating Voltage 24 V
Alternator Supplied Amperage 80 amps
Rear Axle Oscillation 16 degrees
Tire Size 31.5 – 25

Transmission

Transmission Type Automatic Powershift
Number Of Forward Gears 3
Number Of Reverse Gears 3
Max Speed – Forward 13.1 mph (21.1 km/h)
Max Speed – Reverse 19.3 mph (31.1 km/h)

Hydraulic System

Relief Valve Setting 3200 psi (22050 kPa)
Pump Flow Capacity 104 gal/min (394 L/min)
Raise Time 6.5 sec
Dump Time 1.5 sec
Lower Time 3 sec
Pump Type Variable axial piston
Ask a question