John Deere 824K High-Lift Wheel Loader

Bucket

Dump Clearance At Max Raise 11.91 ft in (3630 mm)
Bucket Capacity – Heaped 6.02 yd3 (4.6 m3)
Bucket Capacity – Struck 5.24 yd3 (4 m3)
Bucket Width 10.73 ft in (3270 mm)
Breakout Force 39570 lb (176.02 kN)

Dimensions

Ground Clearance 1.51 ft in (460 mm)
Length With Bucket On Ground 32.06 ft in (9770 mm)
Width Over Tires 10.06 ft in (3065 mm)
Height To Top Of Cab 11.49 ft in (3500 mm)
Wheelbase 11.36 ft in (3460 mm)
Hinge Pin – Max Height 15.92 ft in (4850 mm)
Reach At Max Lift And Dump 5.35 ft in (1630 mm)

Engine Details

Number Of Cylinders 6
Engine Make John Deere
Engine Model 6135H, Tier III certified
Net Power 333 hp (248.4 kw)
Power Measured @ 1600 rpm
Max Torque 1194 lb ft (1618.9 Nm)
Displacement 824 cu in (13.6 L)
Torque Measured @ 900 rpm
Aspiration Turbocharged charge air cooled
Torque Rise 59 %

Operational Specs

Operating Weight 56634.6 lb (25689 kg)
Fuel Tank Capacity 124.1 gal (469.4 L)
Hydraulic System Fluid Capacity 42.1 gal (159 L)
Engine Oil Fluid Capacity 10.1 gal (37.9 L)
Cooling System Fluid Capacity 12.6 gal (47.4 L)
Transmission Fluid Capacity 7.4 gal (27.9 L)
Front Axle/Diff Fluid Capacity 12.2 gal (45.9 L)
Rear Axle/Diff Fluid Capacity 12.2 gal (45.9 L)
Static Tipping Weight 37983.5 lb (17229 kg)
Turning Radius 19.5 ft in (5920 mm)
Operating Voltage 24 V
Alternator Supplied Amperage 80 amps
Rear Axle Oscillation 26 degrees
Tire Size 26.5 R 25

Transmission

Transmission Type Countershaft, powershift
Number Of Forward Gears 4
Number Of Reverse Gears 3
Max Speed – Forward 24.9 mph (40 km/h)
Max Speed – Reverse 18.8 mph (30.1 km/h)

Hydraulic System

Relief Valve Setting 3650 psi (25165.9 kPa)
Pump Flow Capacity 135.6 gal/min (513 L/min)
Raise Time 5.9 sec
Dump Time 1.3 sec
Lower Time 2.6 sec
Pump Type two variable displacement, load-sensing axial piston
Ask a question