Liebherr L 528 Wheel Loader

Bucket

Dump Clearance At Max Raise 9.1 ft in (2773.68 mm)
Arm Length 8.2 ft in (2499.36 mm)
Breakout Force 17985.01 lb (80.01 kN)
Bucket Capacity – Heaped 3 yd3 (2.3 m3)
Bucket Width 8.2 ft in (2499.36 mm)
Digging Depth 2 ft in (609.6 mm)

Dimensions

Ground Clearance 1.6 ft in (487.68 mm)
Length With Bucket On Ground 23.6 ft in (7193.28 mm)
Height To Top Of Cab 10.6 ft in (3230.88 mm)
Wheelbase 9.4 ft in (2865.12 mm)
Hinge Pin – Max Height 12.7 ft in (3870.96 mm)
Reach At Max Lift And Dump 3.7 ft in (1127.76 mm)

Electrical System

Alternator 24/100 (V/A)
Voltage 24 V V
Starter 24/10.5 (V/HP)
Battery 2 x 135 Ah

Engine Details

Fuel Injection Electronic Common Rail high-pressure injection
Number Of Cylinders 4
Engine Model 4045HFL93
Air Cleaner Dry air filter with main and safety element, pre-cleaner, service indicator on the display
Gross Power 134 hp (100 kw)
Power Measured @ 2000 rpm
Max Torque 363 lb ft
Displacement 275 cu in (4.6 L)
Torque Measured @ 1600 rpm
Aspiration Water-cooled with exhaust turbo charging, externally cooled exhaust gas recirculation and diesel particulate filter
Bore 4.2 in (106.7 mm)
Stroke 5 in (127 mm)

Operational Specs

Operating Weight 24030 lb (10899.9 kg)
Fuel Tank Capacity 54.2 gal (205.2 L)
Hydraulic System Fluid Capacity 44.9 gal (170 L)
Engine Oil Fluid Capacity 5.4 gal (20.5 L)
Cooling System Fluid Capacity 10 gal (37.9 L)
Hydraulic Fluid Capacity 29 gal (109.8 L)
Transmission Fluid Capacity 1 gal (3.8 L)
Front Axle/Diff Fluid Capacity 4.3 gal (16.3 L)
Rear Axle/Diff Fluid Capacity 4 gal (15.2 L)
Static Tipping Weight 18740 lb (8500.4 kg)
Turning Radius 19.3 ft in (5882.7 mm)
Tire Size 17.5R25 L3

Transmission

Number Of Forward Gears 3
Number Of Reverse Gears 3
Max Speed – Forward 24.9 mph (40.1 km/h)
Max Speed – Reverse 24.9 mph (40.1 km/h)

Hydraulic System

Max Operating Pressure 4786 psi
Relief Valve Setting 4351.2 psi (30000 kPa)
Pump Flow Capacity 36 gal/min (136.3 L/min)
Raise Time 5.4 sec
Dump Time 1.8 sec
Lower Time 4 sec
Pump Type “Load-sensing” variable axial piston pump with output and flow control, and pressure cut-off in the control block
Ask a question