Bucket
Dump Clearance At Max Raise | 9 ft in (2743.2 mm) |
Bucket Capacity – Heaped | 3 yd3 (2.3 m3) |
Bucket Width | 8.2 ft in (2499.36 mm) |
Breakout Force | 25180 lb (112.01 kN) |
Dimensions
Ground Clearance | 1.7 ft in (518.16 mm) |
Length With Bucket On Ground | 24 ft in (7315.2 mm) |
Height To Top Of Cab | 10.8 ft in (3291.84 mm) |
Wheelbase | 9.9 ft in (3017.52 mm) |
Hinge Pin – Max Height | 12.9 ft in (3931.92 mm) |
Reach At Max Lift And Dump | 3.7 ft in (1127.76 mm) |
Engine Details
Number Of Cylinders | 4 |
Engine Make | Liebherr |
Engine Model | 4045HFL93 |
Air Cleaner | Dry air filter with main and safety element, pre-cleaner, service indicator on the display |
Gross Power | 154 hp (114.9 kw) |
Power Measured @ | 2000 rpm |
Max Torque | 454 lb ft |
Displacement | 275 cu in (4.6 L) |
Torque Measured @ | 1600 rpm |
Aspiration | Inline engine, water-cooled exhaust-turbo charged with intercooler |
Bore | 4.2 in (106.7 mm) |
Stroke | 5 in (127 mm) |
Operational Specs
Operating Weight | 27028.7 lb (12260 kg) |
Fuel Tank Capacity | 54.2 gal (205.2 L) |
Hydraulic System Fluid Capacity | 47.6 gal (180.2 L) |
Engine Oil Fluid Capacity | 5.4 gal (20.5 L) |
Cooling System Fluid Capacity | 10 gal (37.9 L) |
Transmission Fluid Capacity | 1 gal (3.8 L) |
Front Axle/Diff Fluid Capacity | 4.3 gal (16.3 L) |
Rear Axle/Diff Fluid Capacity | 4 gal (15.2 L) |
Static Tipping Weight | 22399 lb (10160 kg) |
Turning Radius | 20.1 ft in (6126.5 mm) |
Operating Voltage | 24 V |
Alternator Supplied Amperage | 55 amps |
Rear Axle Oscillation | 12 degrees |
Tire Size | 20.5R25 L3 |
Transmission
Transmission Type | Stepless hydrostatic travel drive |
Number Of Forward Gears | 3 |
Number Of Reverse Gears | 3 |
Max Speed – Forward | 24.9 mph (40.1 km/h) |
Max Speed – Reverse | 24.9 mph (40.1 km/h) |
Hydraulic System
Relief Valve Setting | 4351.2 psi (30000 kPa) |
Pump Flow Capacity | 45 gal/min (170.4 L/min) |
Raise Time | 5.3 sec |
Dump Time | 1.6 sec |
Lower Time | 4 sec |
Pump Type | Load-Sensing vaiable axial piston pump with output control and pressure cutoff |