Liebherr L 566 Wheel Loader

Bucket

Dump Clearance At Max Raise 10.8 ft in (3291.84 mm)
Arm Length 9.7 ft in (2956.56 mm)
Breakout Force 44959.54 lb (199.99 kN)
Bucket Capacity – Heaped 5.2 yd3 (3.98 m3)
Bucket Width 9.1 ft in (2773.68 mm)
Digging Depth 4 ft in (1219.2 mm)

Dimensions

Ground Clearance 1.9 ft in (579.12 mm)
Length With Bucket On Ground 30.5 ft in (9296.4 mm)
Height To Top Of Cab 11.9 ft in (3627.12 mm)
Wheelbase 12.5 ft in (3810 mm)
Hinge Pin – Max Height 14.4 ft in (4389.12 mm)
Reach At Max Lift And Dump 3.1 ft in (944.88 mm)

Electrical System

Alternator 28/100 (V/A)
Voltage 24 V V
Starter 24/10.5 (V/HP)
Battery 2 x 180 Ah

Engine Details

Fuel Injection Electronic Common Rail high-pressure injection
Number Of Cylinders 4
Engine Model D936 A7
Air Cleaner Dry air filter with main and safety element, pre-cleaner, service indicator on the display
Gross Power 255 hp (190.2 kw)
Power Measured @ 1300 rpm
Max Torque 1033 lb ft
Displacement 642 cu in (10.6 L)
Torque Measured @ 1300 rpm
Aspiration Water-cooled with exhaust turbo charging, externally cooled exhaust gas recirculation and diesel particulate filter
Bore 4.8 in (122 mm)
Stroke 6 in (150.2 mm)

Operational Specs

Operating Weight 51035 lb (23149.1 kg)
Fuel Tank Capacity 106 gal (401.3 L)
Hydraulic System Fluid Capacity 70 gal (265 L)
Engine Oil Fluid Capacity 11.6 gal (44 L)
Cooling System Fluid Capacity 13.7 gal (51.9 L)
Hydraulic Fluid Capacity 35.7 gal (135.2 L)
Transmission Fluid Capacity 3 gal (11.4 L)
Front Axle/Diff Fluid Capacity 11.1 gal (42.1 L)
Rear Axle/Diff Fluid Capacity 10.6 gal (40.2 L)
Static Tipping Weight 34720 lb (15748.8 kg)
Turning Radius 21.3 ft in (6492.3 mm)
Tire Size 23.5R25 L3

Transmission

Number Of Forward Gears 3
Number Of Reverse Gears 3
Max Speed – Forward 24.9 mph (40.1 km/h)
Max Speed – Reverse 24.9 mph (40.1 km/h)

Hydraulic System

Max Operating Pressure 5076 psi
Relief Valve Setting 4351.2 psi (30000 kPa)
Pump Flow Capacity 77 gal/min (291.5 L/min)
Raise Time 5.5 sec
Dump Time 3 sec
Lower Time 3.5 sec
Pump Type “Load-sensing” variable axial piston pump with output and flow control, and pressure cut-off in the control block
Ask a question