Contents
Bucket
Dump Clearance At Max Raise | 10.8 ft in (3291.84 mm) |
Arm Length | 10.4 ft in (3169.92 mm) |
Bucket Capacity – Heaped | 7.8 yd3 (5.97 m3) |
Bucket Width | 11.3 ft in (3444.24 mm) |
Digging Depth | 4 ft in (1219.2 mm) |
Dimensions
Ground Clearance | 1 ft in (304.8 mm) |
Length With Bucket On Ground | 34.3 ft in (10454.64 mm) |
Height To Top Of Cab | 11.9 ft in (3627.12 mm) |
Wheelbase | 12.2 ft in (3718.56 mm) |
Reach At Max Lift And Dump | 9 ft in (2743.2 mm) |
Electrical System
Alternator | 28/140 (V/A) |
Voltage | 24 V V |
Starter | 24/10.5 (V/HP) |
Battery | 2 x 180 Ah |
Engine Details
Fuel Injection | Electronic Common Rail high-pressure injection |
Number Of Cylinders | 6 |
Engine Model | D936 A7 |
Net Power | 335 hp (249.9 kw) |
Air Cleaner | Dry type filter with main and safety element, pre-cleaner, service indicator on the Liebherr display |
Gross Power | 339 hp (252.8 kw) |
Power Measured @ | 1800 rpm |
Max Torque | 1450 lb ft |
Displacement | 642 cu in (10.6 L) |
Torque Measured @ | 1000 rpm |
Aspiration | Water-cooled in-line engine with charge-air cooling, exhaust after-treatment through Liebherr-SCR technology |
Bore | 4.8 in (122 mm) |
Stroke | 6 in (150.2 mm) |
Operational Specs
Operating Weight | 80800 lb (36650.3 kg) |
Fuel Tank Capacity | 96 gal (363.4 L) |
Hydraulic System Fluid Capacity | 60.8 gal (230.2 L) |
Engine Oil Fluid Capacity | 10.6 gal (40.2 L) |
Cooling System Fluid Capacity | 19.3 gal (73.1 L) |
Hydraulic Fluid Capacity | 25.1 gal (95.1 L) |
Front Axle/Diff Fluid Capacity | 15.3 gal (58 L) |
Rear Axle/Diff Fluid Capacity | 15.3 gal (58 L) |
Static Tipping Weight | 47620 lb (21600.1 kg) |
Tire Size | 800/65R29 Michelin XLD65 |
Transmission
Max Speed – Forward | 24.9 mph (40.1 km/h) |
Max Speed – Reverse | 24.9 mph (40.1 km/h) |
Hydraulic System
Max Operating Pressure | 5076 psi |
Relief Valve Setting | 4351.2 psi (30000 kPa) |
Pump Flow Capacity | 111 gal/min (420.2 L/min) |
Pump Type | “Load-sensing” variable axial piston pump with output and flow control, and pressure cut-off in the control block |