New Holland W50C TC Wheel Loader

Bucket

Bucket Width 6.24 ft in (1900 mm)
Breakout Force 9048 lb (40.25 kN)
Bucket Capacity – Struck 1 yd3 (0.77 m3)

Dimensions

Wheelbase 6.81 ft in (2075 mm)
Dig Depth 2.88 in (73 mm)
Dump Height – Fully Raised, 45° Dump 94.34 in (2396 mm)
Ground Clearance Under Axles 12.64 in (321 mm)
Angle Of Departure 28 degrees
Hinge Pin Height – Fully Raised 122.56 in (3113 mm)
Operating Height – Fully Raised With Spillgaurd 55.12 in (1400 mm)
Overall Length – Bucket Level On Ground 205.48 in (5219 mm)
Overall Width Without Bucket 68.51 in (1740 mm)
Rear Axle Oscillation, Total 18 degrees
Total Angle 80 degrees
Tread Width 55.12 in (1400 mm)
Turning Angle -From Center 40 degrees
Turning Radius – Outside 12.21 ft in (3721 mm)
Ground Clearance Under Shaft 17.49 in (444 mm)
Bucket Reach – 7 Ft 0 (2.13m), 45° Dump 37.33 in (948 mm)
Bucket Reach – Fully Raised, 45° Dump 26.3 in (668 mm)
Cab Height 96.78 in (2458 mm)

Speeds

Turtle – Forward 3.2 mph (5 km/h)
Turtle – Reverse 3.2 mph (5 km/h)
Rabbit – Forward 12.5 mph (20 km/h)
Rabbit- Reverse 12.5 mph (20 km/h)

Engine Details

Fuel Injection High pressure common rail injection
Fuel Filter Replaceable, full flow
Fan Direct drive
Radiator Core Type Staggered
Lubrication/Cooling Oil Pump integral
Engine Oil SAE 10W40, CJ-4 DIESEL, SAE 0W40, CJ-4 DIESEL
Pump Deep sump plate cooler with pressurized under-piston nozzles
Pump Operating Angles -Side-To-Side 35 degrees
Pump Operating Angles – Fore And Aft 35 degrees
Oil Filtration Replaceable, full flow
Engine Speed – Rated Speed, Full Load 2500 rpm
Engine Speed- Low Idle 950 rpm
Engine Speed – High Idle 2500 rpm
Air Filter Type Dry type element with warning restriction indicator
Horsepower – Gross 57.7 hp (43 kw)
Horsepower -Net 55 hp (41 kw)
Number Of Cylinders 4 cylinders
Make / Displacement Liter 3
Engine Model F5HFL463B*F001
Engine Type 4-stroke
Fuel Type Diesel
Bore 3.9 in (99 mm)
Stroke 4.4 in (110 mm)

Drive Train

Service Brakes Single pedal. Not assisted, Hydraulic Brake pump with control of the “Inching” function. Auto refill system with auxiliary fluid tank. Caliper on front axle
Parking Brakes Mechanical control lever, Single dry disk on input of the front axle, Mechanical Caliper with no auto wear adjustment
Planetaries Outboard
Pump Relief 6 psi (41.4 kPa)
Pump Flow 26 gal/min (98.5 L/min)
Differential Open or LSD
Front Axle – Differential Ratio 3.67
Front Axle – Planetary Ratio 6
Front Axle – Final Axle Ratio 22
Gear Box – 1st Ratio 1.85
Transmission Hydrostatic transmission

Electrical

Voltage 12 V
Alternator 120 amps
Batteries 95 AHR, 900 CCA

Weights

Reference Configuration Unit Equipped with ROPS/FOPS cab with heater, standard counterweight, front and rear fenders, full fuel, 165 (75 kg) operator
Reference Tires 12.5-18 PRMPT Dunlop Tires
Operating Weights 10912.9 lb (4950 kg)

Hydraulic

Pump (Steering/Implement) Open-centered pressure/flow compensated. Fixed gear pump
Lift Cylinder(S) one
Lift Cylinder-Bore Diameter 4.1 in (102 mm)
Loader Control Valve Open-center, Hydraulic Loader Control with single lever includes: Forward/Neutral/Reverse switch, Floating switch, Low/High Travel mode switch, Auxiliary Function Roller
Loader Auxiliary Steering Hydraulic orbital center-pivot articulating w/on-demand oil flow
Lift Cylinder – Rod Diameter 2.1 in (51 mm)
Filtration 15-micron, full flow replaceable cartridges on return line
Flow At 2500 Rpm 17.7 gal/hour (67 L/hour)
Lift Cylinder – Stroke 23.7 in (600 mm)
Dump Cylinder – Bore Diameter 3.3 in (83 mm)
Main Relief Pressure 3335 psi (22994 kPa)
Dump Cylinder – Rod Diameter 2.1 in (51 mm)
Dump Cylinder – Stroke 15.4 in (391 mm)
Pump Type Additional HF pump
Ask a question