Contents
Bucket
Bucket Width | 6.24 ft in (1900 mm) |
Breakout Force | 13320 lb (59.26 kN) |
Bucket Capacity – Struck | 0.7 yd3 (0.54 m3) |
Bucket Reach – 7 Ft 0 (2.13m), 45° Dump | 43.39 in (1102 mm) |
Bucket Reach – Fully Raised, 45° Dump | 30.16 in (766 mm) |
Dig Depth | 2.88 in (73 mm) |
Dump Height – Fully Raised, 45° Dump | 98.04 in (2490 mm) |
Angle Of Departure | 28 degrees |
Total Angle | 80 degrees |
Hinge Pin Height – Fully Raised | 123.47 in (3136 mm) |
Dimensions
Overall Length – Bucket Level On Ground | 208 in (5283 mm) |
Wheelbase | 6.81 ft in (2075 mm) |
Operating Height – Fully Raised With Spillgaurd | 55.12 in (1400 mm) |
Height to Top of Cab | 96.78 in (2458 mm) |
Overall Width Without Bucket | 68.51 in (1740 mm) |
Tread Width | 55.12 in (1400 mm) |
Rear Axle Oscillation, Total | 18 degrees |
Turning Angle – From Center | 40 degrees |
Turning Radius – Outside | 12.21 ft in (3721 mm) |
Ground Clearance Under Shaft | 17.49 in (444 mm) |
Ground Clearance Under Axles | 12.64 in (321 mm) |
Engine Details
Number Of Cylinders | 4 |
Engine Make | FPT Industrial |
Engine Model | FPT F5HFL463B*F001 |
Displacement | 207.5 cu in (3.4 L) |
Bore | 3.9 in (99 mm) |
Stroke | 4.3 in (110 mm) |
Gross Power | 58 hp (43 kw) |
Net Power | 55 hp (41 kw) |
Power Measured @ | 2500 rpm |
Peak Torque | 185 lb ft (251 Nm) |
Torque Measured @ | 1400 rpm |
Fuel Injection | High pressure common rail injection |
Fuel Filter | Replaceable, full flow |
Fan | Direct drive |
Radiator Core Type | Staggered |
Lubrication/Cooling Oil Pump | integral |
Engine Oil | SAE 10W40, CJ-4 DIESEL, SAE 0W40, CJ-4 DIESEL |
Pump | Deep sump plate cooler with pressurized under-piston nozzles |
Pump Operating Angles -Side-To-Side | 35 degrees |
Pump Operating Angles – Fore And Aft | 35 degrees |
Oil Filtration | Replaceable, full flow |
Engine Speed – Rated Speed, Full Load | 2500 rpm |
Engine Speed – Low Idle | 950 rpm |
Engine Speed – High Idle | 2500 rpm |
Air Filter Type | Dry type element with warning restriction indicator |
Aspiration | Turbocharged and aftercooled |
Emission Standards | US EPA Tier 4 Final |
Operating Specs
Operating Weight | 11111 lb (5040 kg) |
Configuration | ROPS/FOPS cab with heater, standard counterweight, front and rear fenders |
Operating Voltage | 12 V |
Alternator | 120 amps |
Battery | 12 V, 95 Ah, CCA 900 |
Tire Size | 12.5-18 PRMPT Dunlop Tires |
Drive Train
Transmission | Hydrostatic transmission |
Gear Box – 1st Ratio | 1.85 |
Transmission Pump Flow | 26 gal/min (100 L/min) |
Turtle Speed – Forward | 3.2 mph (5 km/h) |
Turtle Speed – Reverse | 3.2 mph (5 km/h) |
Rabbit Speed – Forward | 12.5 mph (20 km/h) |
Rabbit Speed – Reverse | 12.5 mph (20 km/h) |
Service Brakes | Single pedal. Hydraulic Brake pump with control of the “Inching” function. Caliper on front axle |
Parking Brakes | Mechanical control lever, Single dry disk on input of the front axle, Mechanical Caliper with no auto wear adjustment |
Planetaries | Outboard |
Pump Relief | 6 psi (41.4 kPa) |
Pump Flow | 26 gal/min (98.5 L/min) |
Differential | Open or LSD |
Front Axle – Differential Ratio | 3.67 |
Front Axle – Planetary Ratio | 6 |
Front Axle – Final Axle Ratio | 22 |
Hydraulic System
Pump Type | Open-centered pressure/flow compensated. Fixed gear pump |
Main Pump Flow | 18 gal/min (67 L/min) |
Main Relief Pressure | 3335 psi (23000 kPa) |
Filtration | 15-micron, full flow replaceable cartridges on return line |
Loader Control Valve | Open-center, Hydraulic Loader Control with single lever includes: Forward/Neutral/Reverse switch, Floating switch, Low/High Travel mode switch, Auxiliary Function Roller |
Loader Auxiliary Steering | Hydraulic orbital center-pivot articulating w/on-demand oil flow |
Service Refill Capacities
Fuel Tank Capacity | 23 gal (87 L) |
Engine Oil Capacity (w/ Filter) | 1.8 gal (7 L) |
Cooling System Capacity | 3.4 gal (13 L) |
Hydraulic System Capacity | 15 gal (57 L) |
Hydraulic Tank Capacity | 10.6 gal (40 L) |
Front Axle Oil Capacity | 2.4 gal (9 L) |
Rear Axle Oil Capacity | 3.4 gal (13 L) |