New Holland W80C Wheel Loader

Bucket

Bucket Width 6.89 ft in (2100 mm)
Breakout Force 13927 lb (61.96 kN)
Bucket Capacity – Struck 1.2 yd3 (0.92 m3)

Dimensions

Wheelbase 7.3 ft in (2225 mm)
Dig Depth 3.31 in (84 mm)
Dump Height – Fully Raised, 45° Dump 105.79 in (2687 mm)
Ground Clearance Under Axles 14.57 in (370 mm)
Angle Of Departure 32 degrees
Hinge Pin Height – Fully Raised 133.67 in (3395 mm)
Operating Height – Fully Raised With Spillgaurd 170.16 in (4322 mm)
Overall Length – Bucket Level On Ground 223.78 in (5684 mm)
Overall Width Without Bucket 73.23 in (1860 mm)
Rear Axle Oscillation, Total 20 degrees
Total Angle 80 degrees
Tread Width 59.06 in (1500 mm)
Turning Angle -From Center 40 degrees
Turning Radius – Outside 13.09 ft in (3987 mm)
Ground Clearance Under Shaft 19.41 in (493 mm)
Bucket Reach – 7 Ft 0 (2.13m), 45° Dump 52.09 in (1323 mm)
Bucket Reach – Fully Raised, 45° Dump 33.27 in (845 mm)
Cab Height 105.52 in (2680 mm)

Speeds

Turtle – Forward 3.2 mph (5 km/h)
Turtle – Reverse 3.2 mph (5 km/h)
Rabbit – Forward 8.7 mph (14 km/h)
Rabbit- Reverse 8.7 mph (14 km/h)

Engine Details

Fuel Injection High pressure common rail injection
Fuel Filter Replaceable, full flow
Fan Direct drive
Radiator Core Type Staggered
Lubrication/Cooling Oil Pump integral
Engine Oil SAE 10W40, CJ-4 DIESEL, SAE 0W40, CJ-4 DIESEL
Pump Operating Angles -Side-To-Side 35 degrees
Pump Deep sump plate cooler with pressurized under-piston nozzles
Oil Filtration Replaceable, full flow
Pump Operating Angles – Fore And Aft 35 degrees
Engine Speed – Rated Speed, Full Load 2500 rpm
Engine Speed- Low Idle 950 rpm
Engine Speed – High Idle 2500 rpm
Air Filter Type Dry type element with warning restriction indicator
Horsepower – Gross 73.8 hp (55 kw)
Horsepower -Net 69.8 hp (52 kw)
Number Of Cylinders 4 cylinders
Make / Displacement Liter 3
Engine Model F5HFL463A*F004
Engine Type 4-stroke
Fuel Type Diesel
Bore 3.9 in (99 mm)
Stroke 4.4 in (110 mm)

Drive Train

Service Brakes Single pedal. Not assisted, Hydraulic Brake pump with control of the “Inching” function. Auto refill system with auxiliary fluid tank. Caliper on front axle
Parking Brakes Mechanical control lever, Single dry disk on input of the front axle, Mechanical Caliper with no auto wear adjustment
Planetaries Outboard
Pump Relief 6 psi (41.4 kPa)
Pump Flow 37 gal/min (140.1 L/min)
Differential Open Diff or LSD or 100% Diff Lock
Front Axle – Differential Ratio 3.67
Front Axle – Planetary Ratio 6
Front Axle – Final Axle Ratio 22
Gear Box – 1st Ratio 2.75
Gear Box – 2nd Ratio 1.163
Transmission Hydrostatic transmission

Electrical

Voltage 12 V
Alternator 120 amps
Batteries 95 AHR, 900 CCA

Weights

Reference Configuration Unit Equipped with ROPS/FOPS cab with heater, standard counterweight, front and rear fenders, full fuel, 165 (75 kg) operator
Reference Tires 365/80 R20 Dunlop Tires
Operating Weights 13183.7 lb (5980 kg)
With Optional Counterweight 13514.4 lb (6130 kg)

Hydraulic

Pump (Steering/Implement) Open-centered pressure/flow compensated. Fixed gear pump
Lift Cylinder(S) one
Lift Cylinder-Bore Diameter 3.4 in (84 mm)
Loader Control Valve Open-center, Hydraulic Loader Control with single lever includes: Forward/Neutral/Reverse switch, Floating switch, Low/High Travel mode switch, Auxiliary Function Roller
Loader Auxiliary Steering Hydraulic orbital center-pivot articulating w/on-demand oil flow
Lift Cylinder – Rod Diameter 2.1 in (51 mm)
Filtration 15-micron, full flow replaceable cartridges on return line
Lift Cylinder – Stroke 29.6 in (751 mm)
Flow At 2500 Rpm 22.5 gal/hour (85 L/hour)
Dump Cylinder – Bore Diameter 3.6 in (89 mm)
Main Relief Pressure 3335 psi (22994 kPa)
Dump Cylinder – Rod Diameter 2.3 in (57 mm)
Dump Cylinder – Stroke 20 in (507 mm)
Pump Type Additional HF pump
Ask a question