Bucket
Dump Clearance At Max Raise | 9.8 ft in (2985 mm) |
Bucket Capacity – Heaped | 4.01 yd3 (3.06 m3) |
Bucket Capacity – Struck | 3.41 yd3 (2.6 m3) |
Bucket Width | 10.34 ft in (3150 mm) |
Breakout Force | 43100 lb (191.7 kN) |
Dimensions
Ground Clearance | 1.42 ft in (432 mm) |
Length With Bucket On Ground | 27.17 ft in (8280 mm) |
Width Over Tires | 9.42 ft in (2870 mm) |
Height To Top Of Cab | 11.59 ft in (3531 mm) |
Wheelbase | 10.67 ft in (3251 mm) |
Hinge Pin – Max Height | 13.26 ft in (4039 mm) |
Reach At Max Lift And Dump | 3.42 ft in (1041 mm) |
Engine Details
Number Of Cylinders | 6 |
Engine Make | Cummins |
Engine Model | LT-10-225 HT |
Net Power | 203 hp (151.4 kw) |
Gross Power | 225 hp (167.8 kw) |
Power Measured @ | 2000 rpm |
Max Torque | 750 lb ft (1016.9 Nm) |
Displacement | 611 cu in (10.1 L) |
Torque Measured @ | 1300 rpm |
Aspiration | turbocharged & aftercooled |
Operational Specs
Operating Weight | 42220 lb (19150.7 kg) |
Fuel Tank Capacity | 90.9 gal (344 L) |
Hydraulic System Fluid Capacity | 87 gal (329 L) |
Engine Oil Fluid Capacity | 9.1 gal (34.1 L) |
Cooling System Fluid Capacity | 15.1 gal (56.8 L) |
Transmission Fluid Capacity | 10.6 gal (39.8 L) |
Front Axle/Diff Fluid Capacity | 8.6 gal (32.2 L) |
Rear Axle/Diff Fluid Capacity | 8.6 gal (32.2 L) |
Static Tipping Weight | 33060.6 lb (14996 kg) |
Turning Radius | 24.5 ft in (7442 mm) |
Operating Voltage | 24 V |
Alternator Supplied Amperage | 100 amps |
Rear Axle Oscillation | 18.5 degrees |
Tire Size | 23.5-25 (16PR) L-3 |
Transmission
Transmission Type | Clark R32425-6 |
Number Of Forward Gears | 4 |
Number Of Reverse Gears | 4 |
Max Speed – Forward | 19.9 mph (32.1 km/h) |
Max Speed – Reverse | 19.9 mph (32.1 km/h) |
Hydraulic System
Relief Valve Setting | 2750 psi (18960.6 kPa) |
Pump Flow Capacity | 31 gal/min (117.4 L/min) |
Raise Time | 7.5 sec |
Dump Time | 1.5 sec |
Lower Time | 2 sec |
Pump Type | gear type |